Rocket City Coatings

Garage Floor Coating in Franklin

$5–$9/sq ft · new-build cure rules published

Franklin's garages live in master-planned communities built in the last twenty years — Westhaven, Berry Farms, McKay's Mill — where the house got every upgrade and the garage floor stayed builder-gray. The floor is usually the last builder-grade thing left in the house — and the fix takes one day, once the concrete is actually ready for it.

Two-car garage with a white, gray, and black flake-coated floor
Real install — Tuff Dog Coatings, our installation crew
28 + Days of cure before we coat new pours — no exceptions
750 Sq ft in a typical 3-car bay the Williamson County default
1 Day of installation park on it in 24–48 hours

The quote is fast. The concrete sets the schedule.

The most common Franklin scheduling conversation is cure timing: in communities still building, owners want the garage finished the month they close, and concrete younger than 28 days can't be coated — so we quote immediately and install when the slab is ready. It's the same rule we publish for fast-growing communities on the Alabama end of our route — the Madison new-slab timing table applies word for word in Westhaven and Berry Farms.

Garage floor coating in Franklin runs $5–$9 per square foot installed — $2,000–$3,800 for a typical 2-car — at the same published rates we quote on every job. Inside that range, Franklin quotes mostly move on prep: production slabs carry a soft cream layer that gets diamond-ground off, plus the hairline shrinkage cracks every volume pour develops — routed, filled, and invisible under the finished floor. The cracked-slab page shows how we tell those from cracks that matter.

Installation is by Tuff Dog Coatings' Nashville operation, so a Franklin job gets a Middle Tennessee crew working a written spec — not a truck making a one-off trip from Alabama. The system their installers put down is the one we publish mil by mil — polyurea base, full Torginol broadcast, polyaspartic top — on the flagship system page.

New-slab timing — when Franklin concrete is ready
Slab ageOur call
Under 28 daysWe wait. No coating, no exceptions.
28–90 daysCoatable with a passing moisture test
3–12 monthsStandard install; shrinkage cracks filled first
Over 1 yearFully seasoned — the easy quote

Get a Franklin quote

Tell us the community, the closing date, and the garage size. Price today, install when the slab is ready.

We're closing on a Westhaven build next month — can the garage be coated before the furniture arrives?
Only if the slab is at least 28 days past pour and passes a moisture test — and on a fresh build it often isn't by closing day. The honest sequence: we quote now, you move in, and the install lands a few weeks later, one day on the tools. A coating rushed onto uncured concrete fails at the bond line, and no warranty survives that.
What does a 3-car Franklin garage cost to coat?
Most 3-car bays run 600–750 square feet, which at $5–$9/sq ft works out to roughly $3,000–$6,750 installed. Williamson County builds 3-car by default, and the third bay is the cheapest concrete on the floor — square footage scales, setup doesn't.
Is builder-grade concrete in newer Franklin communities good enough to coat?
Yes — with prep. Production pours cure with a soft top layer of surface cream and a few hairline shrinkage cracks; nearly every young slab has them. Diamond grinding removes the cream down to hard aggregate and cracks get routed and filled before the base coat. What can't be fixed is concrete that isn't done curing — which is why the 28-day rule has no exceptions.
Do you coat Franklin patios and outdoor slabs too?
Yes — exterior work gets a UV-stable polyaspartic with slip texture standard, rated for full Tennessee sun. Same crew, same published pricing approach; the system details are on the patio and pool deck page.

Get a number, not a runaround

Tell us what you're working with and we'll give you a straight price range on the phone. No pressure visit required to hear a number.

CALL (339) 368-5083